COMMAND Center Sensors carefully measure and store temperature readings at fixed intervals depending on your specific needs for monitoring concrete temperature and strength gain.
COMMAND Center Sensors are embedded in your concrete placement, automatically measuring temperature at common, user-defined intervals. This temperature data is stored by the sensors and can be read and analyzed wirelessly or on a handheld device using free COMMAND Center software.
COMMAND Center Sensors measure temperatures with an accuracy of ±1 °C (1.8 °F), which meets ASTM C1074 guidelines, the current ASTM International Standard for monitoring in-place concrete maturity.
COMMAND Center Sensors come in standard lengths ranging from 4 to 50 feet, so you can select a sensor from a range of options to best fit your project. Standard length sensors are always in stock, so your order can be placed and shipped on the same day.
If your project requires a sensor length longer than the standard lengths offered, we can build to your specified length. A sensor custom-built for your project can help in special cases such as for hard-to-reach areas or for deep or large concrete pours. If purchasing a custom sensor is not possible for your project, you can also splice additional cable to standard-length sensors to achieve the length you need.
The sensors’ bright orange color ensures that they stand out against the concrete, making it easier to verify correct positioning during pouring, as well as to locate after pouring to connect to and retrieve data. This visibility greatly reduces the chance of losing or damaging the sensor cable during and after placement.
COMMAND Center Sensors start at just $35 and are protected under the most inclusive, iron-clad satisfaction guarantee in the industry.
Our promise: If you don’t like our equipment, send it back for a full refund! You’ll only be responsible for shipping and handling charges. We’ll cover the full price of the equipment.
Check out more news below: